点击图片查看原图
该纳米涂层，透明，防水，防污垢，防紫外线，可用于多孔基材表面（天然石材人工石材均可）如砂岩，混凝土，陶土，粘土砖或石镶板。地板或墙面涂料，建筑立面，陶器或屋顶瓦片都是该产品的应用范围。这种超薄纳米涂层虽然会渗入孔内部，但却不会影响基质透气性，是非常完美的建筑矿物质保护材料。大部分污垢会被雨水冲走。（中国进出口网）
使用范例：
各种含矿物质的材料的多孔表面
水泥/混凝土块
石灰石/砂岩
多孔花岗岩/大理石
屋顶瓦片/泥土/兵马俑
产品特点：
强疏水性疏油性
强不粘性
轻松去除沉积的空气污染物
安全（化学性质不活泼）
优点：
对基质外观没有影响（涂层厚度：100-150纳米）
优良的疏水疏油特性
无溶剂，无气味
室内温度下即可结晶硬化。不需要额外的能量或紫外光线。
高功效，低消耗
耐高温
非常抗冻
其它优点：
污染物不会通过水渗入孔隙。
方便清洗
持久浸透，非常好的抗冻融性，不会冰裂。
极大减少青苔和霉菌的生长
使基质寿命更长，因为降低了清洗周期。
给予基质表面持久的保护。
使基质免受天气损害
用法：
该产品操作简单，同样适用于终端消费者使用：
1.工业：使用标准的HVLP系统。
2.手动：润湿物体表面（通过喷洒或浸泡）
在距离物体表面10cm处喷洒。
此二氧化硅涂层喷洒后24小时固化。易清洁效果只能在硬化后进行测试。
施加该涂层前，一定要彻底清洁物体表面！
贮存：
未开封原装容器纳米涂层可以储存至少2年。
建议仓储和运输温度：3℃〜30℃
喷涂面积：
手动及工业： 30 - 200 ml/㎡，根据基质的吸收性而定。
包装：
250毫升和500毫升，罐装，用于商业用途；5升和更大的罐装纳米涂层，则为工业使用。
nanoblo® Mineral & Porus can therefore be used as an invisible, water- and contamination-resistant, UV-stable coating of porous substrate surfaces, regardless of whether the surface is a natural stone such as sandstone, concrete, terracotta, clay brick or stone panelling. Floor or wall coatings, building facades, functional terracotta or roof tiles are all in the scope of application for this product. Since nano-coatings only apply an ultra-thin coating on the inside of the pores, the substrates remain breathable after the coating - the perfect structural protection. The majority of the contamination is washed away by the rain.
Examples of use:
Every type of porous surface with a mineral-based origin
Concrete / Concrete blocks
Lime stone / Sandstone
Porous granite / marble
Roof tiles / clay / Terracotta
Product characteristics:
Strong hydrophobic + oleophobic properties
Strong non-stick properties
Excellent easy-clean effect regarding deposits of air pollution
Food safe (inert)
Advantages:
No influence on the appearance of the substrate (Layer thickness: 100-150 nm)
Excellent Hydro and Oleophobic properties
Solvent-free and odourless
Hardening at room temperature. No additional energy or UV light required.
Excellent efficiency with low quantity consumption
High temperature-resistance
Absolute frost-resistance
Other positive effects, such as e.g.:
No contamination can infiltrate the pore-structure through water.
Easy cleaning
Enduring impregnation enables very high freeze-thaw resistance and no cracking because of ice.
very heavy reduction of moss and fungus growth
Longer life-spans for substrates because of lowered cleaning cycles.
Enduring protection for the surface structure.
Weather damage prevention
Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Industrial: Application using standard HVLP systems
2. Manual: Application by wetting the surface (spraying or dipping)
Spray the surface form a 10 cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-clean effect can only be tested after this hardening phase.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!
Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30 oC
Consumption:
Manual & Industrial: between 30 and 200 ml/m2, depending on absorbency of the substrate.
Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.