点击图片查看原图
该纳米涂层适用于光滑物体的表面，比如塑料，不锈钢，油漆的表面，光滑的表面。(中国进出口网)
该产品疏水疏油，可使污染物颗粒，如油脂，油，石灰和环境污染物较少的附着基质，还可以使人们不施加摩擦剂就可以很容易地从涂层表面去除这些污垢（“易清洁”效应）。
使用范例：
卫生领域塑料表面（有机玻璃淋浴间）
汽车漆面
铝轮圈漆面
不锈钢表面
产品特点：
强疏水性
强抗粘性
轻松去除污垢，石灰
安全（化学性质不活泼）
其它性能：
透明液体（涂层厚度：100〜150 毫微米）
永久（防紫外线，非常耐磨损）
耐热
操作简单（可自己动手）
耐化学物质
用法：
该产品操作简单，同样适用于终端消费者使用：
1.手动：干净的纸，亚麻或微纤维布，圆周运动
2.工业：涂层抛光，或涂层喷洒
在距离物体表面10cm处喷洒。
此二氧化硅涂层喷洒后24小时固化。易清洁效果只能在硬化后进行测试。
施加该涂层前，一定要彻底清洁物体表面！
贮存：
未开封原装容器纳米涂层可以储存至少2年。
建议储物架和运输温度：3℃〜30℃
喷涂面积：
手动：5 - 10 ml/㎡
工业：10- 15 ml/㎡
和其他产品相比，nanoblo®二氧化硅涂层的竞争优势：
•持久性及其寿命：紫外线稳定性确保其功效达数年之久，接近于涂覆表面寿命
而其他涂层会在阳光下慢慢损耗
•耐磨及易清洁效应：基质施加纳米涂层后，耐磨性能良好。而许多和我们竞争的产品，施加后，会很容易的磨损掉。
•化学稳定性：该产品耐清洗剂（几乎所有的家庭用及工业用洗涤剂，浓缩碱液除外）。
而许多和我们竞争的产品并不具备该特点，在清洁后必须重新施加
包装：
250毫升和500毫升，罐装，用于商业用途；5升和更大的罐装纳米涂层，则为工业使用。
This coating is suitable for smooth surfaces of plastic, stainless steel or painted surfaces.
The hydro- and oleophobic effect causes the particles of contamination such as grease and oil, lime-scale and materials from environmental pollution to adhere less to the substrates or and allow them to be easily removed from the coating, i.e. without applying abrasive agents ("Easy--clean" effect).
Examples of use:
Plastic surfaces in sanitary areas (plexiglass shower cabinet)
Automotive paint
Painted aluminium rims
Stainless steel surfaces
Product characteristics:
Strong hydrophobicity
Strong non-stick properties
Excellent easy-clean effect on contamination and lime-scale
Food-safe (inert)
Other properties:
Invisible to the human eye (coating thickness: 100-150 nm)
Permanent (UV-stable, very resistant to abrasion)
Temperature resistant
Simple application (do-it-yourself)
Chemical resistant
Application:
Simple do-it-yourself application makes it suitable for end-customers as well:
1. Manual: Application with circular motion using a clean paper, linen or microfibre cloth.
2. Industrial: Available as polish-coat systems or spray-coating systems.
Spray the surface from a 10 cm distance.
This SiO2-coating is completely networked and hardened after 24 hours. The easy-to-clean effect can only be tested after this hardening phase.
Stains that may have been left on the surface before the coating procedure will be trapped on the surface by the coating.
ALWAYS COAT CLEAN SURFACES!!!
Storage stability:
Unopened original containers can be stored for at least 2 years.
Recommended storage- and transport temperature: +3 to 30℃
Consumption:
Manual: 5-10 ml/m2
Industrial: 10-15 ml/m2
Advantages of nanoblo® SiO2 coatings in comparison with competitive products:
• Permanence and longevity: The UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface
Many competitive products are damaged slowly by sunlight.
• Abrasion-resistant easy-to-clean effect: A permanent chemical bond with the substrate enables excellent abrasion resistance. Many competitive products can be easily removed by abrasion.
• Chemical stability: The product is resistant to almost all standard household and industrial cleaners (with the exception of concentrated lye).
Many competitive products must be reapplied after cleaning the surface.
Packaging:
The product comes in canisters of 250 ml and 500 ml for commercial use and in 5 liter and bigger canisters for industrial use.